Updated junio 10, 2021
This Service Guide (“SG”) sets forth a description of the Lumen Private Cloud on VMware Cloud Foundation Services offered by Lumen (or the “Services”), including technical details. “Lumen” is defined as CenturyLink Communications, LLC d/b/a Lumen Technologies Group or its affiliated entities. This SG is subject to and incorporated into the Agreement, Hybrid Technologies Service Exhibit (formerly the CenturyLink TS Service Exhibit) and Hosting Service Schedule between the parties. The specific details of the Service ordered by Customer will be set forth on the relevant Service Order. For avoidance of doubt, any references in the Agreement, Schedule, or Service Orders to SSG, shall mean SG.
Lumen Private Cloud on VMware Cloud Foundation is a hosted private cloud service that provides a managed infrastructure for Customer’s use. The infrastructure includes use of the physical servers, space and power for the servers, virtualization Software system licenses, network connectivity to layer 2 switches, use of integrated storage services, management and monitoring of the servers and underlying infrastructure hardware virtualization Software packages system, and use of VMware Cloud Director (VCD) interface for automated instance provisioning. Lumen Private Cloud on VMware Cloud Foundation is based on Lumen’s Hybrid Cloud management strategy. For clarity, Lumen Private Cloud on VMware Cloud Foundation uses VMware’s Cloud Foundation Architecture, including Software-Defined Networking and VSAN Storage for a completely integrated Hyper-converged Cloud Infrastructure.
VCD allows the Customer to configure the environment enabled by Lumen Private Cloud on VMware Cloud Foundation.
The primary capabilities of Lumen Private Cloud on VMware Cloud Foundation are:
Optional Add-on Services:
Nota: The Service Level Agreement (“SLA”) applicable to this Service is the “Managed Hosting Services” SLA Attachment.
A Lumen Private Cloud on VMware Cloud Foundation Host is a dedicated, physical server as well as licensing, monitoring and management of the VMware Cloud Foundation Software Bundle, including vSphere Enterprise Plus, Software-Defined Data Center Manager, NSX Enterprise, VSAN Advanced and VCenter. Lumen Private Cloud on VMware Cloud Foundation Hosts are built upon the HPE ProLiant or Dell PowerEdge rack mount servers. Traditional server Hosts are available in various configurations.
Lumen Private Cloud on VMware Cloud Foundation Host options are the HPE DL-Gen10 or the Dell PowerEdge R640 with the Intel Scalable Xeon Platinum/Gold/Silver Series CPU Configuration Options. Note that a Minimum of 4 Hosts is required per stack.
|Standard Options||Custom Option|
|Small Configuration||Medium Configuration||Large Configuration||Custom Configuration|
Tenga en cuenta: RAM can be configured in 128 GB Increments. Usable storage can be configured in 2.5 TB or 5 TB increments with a 5 TB minimum per Host.
Each Host is connected to dual homed 10 GigE switches with 4 10 GigE Ports. Two 10 GigE Ports are for VSAN traffic only and two 10 GigE Ports are for Customer traffic and VMware management. There is also a single GigE port connected for HPE Integrated Lights Out (ILO) or Integrated Dell Remote Access Controller (iDRAC) for remote management. Lumen and its vendors do not have access to any customer information or traffic transmitted via the Service.
All capacity storage provided with Lumen Private Cloud on VMware Cloud Foundation is SSD Local Disks that are configured with VMware VSAN as part of the standard service offering. Hosts also include NVMe drives for Storage Caching. The default VSAN configuration is RAID-1 with Dedupe and Compression Enabled. Additional VSAN Storage can be added to a Lumen Private Cloud on VMware Cloud Foundation Host through a change order process, which means a Service Order signed by the Customer. Additional storage must adhere to vendor requirements, including that all VSAN storage has to be symmetrical across all Hosts. For example, if Customer wants to add 2.5 TB of useable storage to one Host, Lumen will require that Customer also purchases the same amount of storage to all Hosts in the stack.
Adding RAM to Lumen Private Cloud on VMware Cloud Foundation Hosts can be done through change order process requiring a new Service Order to be signed. Consistent with storage requirements above, and per vendor requirements, the additional RAM ordered and installed needs to be same amount for each of the Hosts in the stack. For example, if Customer wants to increase a Host by 128 GB of RAM, Lumen will require that Customer increase the RAM on all Hosts in the stack.
Customer has the ability to install any type of Guest Operating Systems (OS) or Virtual Appliance as long as it supports being installed on a VMware Hypervisor Platform and the version of Vsphere implemented. Customer is solely responsible for ensuring that any Guest OS or virtual appliance is and remains compatible with the Lumen Private Cloud on VMware Cloud Foundation infrastructure provided and maintained by Lumen.
Guest OS licenses may be provided by the Customer or Lumen can provide licenses for Window Server or RHEL for a fee.
Lumen is responsible for maintaining and supporting all standard installed VMware software and connectivity to the Lumen Private Cloud on VMware Cloud Foundation Hosts as listed here:
TABLE 1 - Lumen Private Cloud on VMware Cloud Foundation Host - VMware Software Included as per CPU Socket Licensing
|VMware® Software Package||Version currently used|
|VSphere Enterprise Plus||ESXi 6.7 U3|
|VCenter Standard||6.7 U3|
|Software Defined Data Center||3.10|
|VSAN Advanced||6.7 U3|
VCD is the interface presented to the Customer. From the VCD login it is Customer’s responsibility to build out their networks, routers and security devices such as Server Load Balancers, Firewalls and VPNs and setting security policies on each device. In addition, the VCD environment is where a Customer will create a Catalog of images, Templates, import open virtual formats (OVFs) and manage Snapshots. All interactions to the backend VCenter, NSX, VSAN, and Vsphere software applications are done through the VCD interface and not directly with the individual VMware software packages. The VMware Cloud Director Tenant Portal API’s are accessible to the customer.
Lumen maintains and monitors all components of the Lumen Private Cloud on VMware Cloud Foundation Service - physical servers, including the repair and replacement of defective or failed hardware and the installation of firmware updates, as needed. Hardware upgrades, such as increasing RAM or increasing Storage, can be performed by Lumen for an additional fee. Lumen may subcontract any hardware support to the manufacturer or equivalent vendor in order to expedite repairs.
Lumen also monitors and maintains all of the VMware Software that is installed as part of the standard Service.
The following diagram identifies the Services and the optional Add-On Services that are available.
Lumen will update Lumen Private Cloud on VMware Cloud Foundation Hosts with all VMware recommended security patches, updates or hot-fixes and will address the overall integrity and performance of servers. Security threats are evaluated, verified and tested before a patch is recommended to customers. Sometimes a reboot is necessary when a patch is distributed and installed, which Lumen will conduct during scheduled Maintenance Windows or in coordination with the Customer.
Customers must approve patches or updates prior to them being applied to their environment; however, Lumen is not responsible for any failure in the service, including SLAs if a Customer does not approve the installation of necessary patches or updates.
Please note that VMware Software Upgrades are not included as part of the standard Service but can be quoted and implemented for an additional fee.
Customer Responsibilities: Customer acknowledges and agrees that its failure to perform its obligations in this SG may result in Lumen’s inability to perform the Services and Lumen will not be liable for any failure to perform, including any SLAs in the event of Customer’s failure. Lumen will not be liable for any failure to perform in the event Customer does not fulfill Customer’s responsibilities and requirements as detailed in the Agreement, Service Attachments and this SG, and in the event of Customer’s errors or omissions in setting up the environment. In addition, Lumen is not responsible for any loss or corruption of Customer Data, content or information. Lumen’s obligations related to Customer Data are exclusively governed by the Security and Compliance section of the applicable Service Exhibit. Some updates, including migrations attributable to vendor service availability as more fully described below in Customer Responsibilities, and as determined by Lumen may require Customer to sign a new Service Order to implement the changes which could include changes to pricing.
Catálogo Un catálogo es un contenedor de plantillas vApp y archivos de medios de una organización. Los administradores de la organización y creadores de catálogos pueden crear catálogos en una organización. El contenido del catálogo se puede compartir con otros usuarios de la organización y también publicar a todas las organizaciones que trabajen con vCloud Director.
nube Arquitectura de base: Cloud Foundation Architecture: VMware Cloud Foundation™ es la nueva plataforma unificada de data center definido por software (SDDC) de VMware para nubes privadas y públicas. Cloud Foundation integra la virtualización de VMware vSphere® (computación), vSAN™ (almacenamiento) y NSX® (red) es un stack nativamente integrado a través de las capacidades de automatización y gestión de ciclo de vida del nuevo VMware SDDC Manager™.
Alojamiento The term Host means the physical server where the virtualization software resides and is synonymous in the industry with the term node.
Hybrid Cloud: Hybrid cloud is a cloud computing environment which uses a mix of on-premises, private cloud and third-party, public cloud services with orchestration between the two platforms.
Hyper-converged: A type of infrastructure system with a software-centric architecture that tightly integrates compute, storage, networking and virtualization resources and other technologies into a single high performance group of physical servers.
Ventanas de mantenimiento: Lumen will use commercially reasonable efforts to perform routine maintenance only during defined maintenance windows. See our published Maintenance Window schedule, or navigate to https://www.ctl.io/legal/managed-hosting/maintenance-windows/ from any Internet browser. Lumen has the right to perform scheduled maintenance (during the windows specified), which may limit or suspend the availability of the Services.
NSX: NSX: una familia de productos de software de seguridad y redes virtuales creados con propiedad intelectual de vCloud Networking and Security (vCNS) de VMware y Nicira Network Virtualization Platform (NVP).
NVMe: Non-Volatile Memory Express is a standard hardware interface for solid state storage drives that uses PCI Express bus.
Snapshot: A snapshot preserves the state and data of a virtual machine at a specific point in time. The state includes the virtual machine’s power state (for example, powered-on, powered-off, suspended). The data includes all of the files that make up the virtual machine. This includes disks, memory, and other devices, such as virtual network interface cards.
Data Centers definidos por software Software-Defined Data Center [SDDC] (Data Center definido por software): un data center donde los elementos de la infraestructura se virtualizan y proveen como servicio y donde el aprovisionamiento y operación se abstrae del hardware y se implementa totalmente a través de software.
Redes definidas por software Software-defined Networking [SDN] (Redes definidas por software): redes definidas por software es un término general que abarca varios tipos de tecnología de red orientados a hacer que la red sea tan ágil y flexible como la infraestructura de servidor y almacenamiento virtualizados de los data centers modernos.
Unidad de estado sólido (SSD): Solid-State Drive [SSD] (Unidad de estado sólido): una unidad de estado sólido es un dispositivo que usa circuitos integrados como memoria para almacenar datos persistentemente.
Plantilla, A Template (also called a golden image) is a perfect, model copy of a virtual machine (VM) from which an administrator can clone, convert or deploy more virtual machines.
vApp: vApp: significa "aplicación virtual" y consiste en una o más máquinas virtuales que se comunican a través de una red y usan recursos y servicios en un entorno implementado. Una vApp puede contener varias máquinas virtuales.
VMware Cloud Director (VCD): vCloud Director (vCD): la herramienta de gestión informática en la nube de VMware Inc. Gestiona arquitecturas de infraestructura como servicio (IaaS) monitoreando y controlando distintos componentes de informática en la nube, como seguridad, aprovisionamiento de máquinas virtuales (VM), facturación y acceso a autoservicio.
VLAN A virtual LAN (vLAN) is any broadcast domain that is partitioned and isolated in a computer network at the data link layer (OSI layer 2).
SAN: VMware Inc.’s Virtual Storage Area Network, which is a software-defined storage offering from VMware that enables enterprises to pool their storage capabilities and to instantly and automatically provision virtual machine storage via simple policies that are driven by the virtual machine. Lumen is not responsible for unauthorized access if Customer does not take its own steps to maintain security, including encryption.volver arriba